Search Results for: results

Results By SMS

VISVESVARAYA TECHNOLOGICAL UNIVERSITY “Jnana Sangama”, Belgaum – 590 018. Karnataka

vcsms
Dr. H. Maheshappa, Hon’ble Vice Chancellor

Resuts by SMS

TO RECEIVE REGULAR RESULTS BY SMS,

SEND THE MESSAGE

RESULT<space>USN<space>YourEmailID to 5424204

Ex: RESULT 4PA03C5007 me@abcd.com to 5424204

TO RECEIVE REVALUATION RESULTS BY SMS,

SEND THE MESSAGE

REVAl<space>USN<space>YourEmailID to 5424204

Ex: REVAL 4SH12CS007 me@abcd.com to 5424204

You will receive the results within a short span of time over SMS & Email. If you do not specify your Email ID, you will get results only by SMS. To know more visit :  www.vtu.ac.in

NOTE: User will be Charged for SMS: Rs. 1/Rs. 2/ Rs. 3 Per SMS (varies operator to operator). These charges can not be changed under any circumstances, these prices are charged by operators as per TRAI regulations

Results: By SMS/Web

Gym and Sports

Ph.D and MSc Engg

 

 

 CIRCULAR –  Ph.D/M.Sc (Engg.,) by Research Course Work Examinations the Candidate admitted in VTURRC centre are hereby informed to use the following user id to fill up the ONLINE EXAMINATION FORM.

 

Notification –  Ph.D/M.Sc (Engg.,) by Research Course Work Examinations.

 

CIRCULAR – All the Ph.D. research scholars, who have NOT COMPLETED their course work examination .

 

Withheld ) Provisional Results Ph.D/M.Sc (Engg.,) by Research Course Work Examinations April/May-2014 

 

RESULT of University Level Research Aptitude Test held on 13th July 2014  for Ph.D/M.Sc.(Engg.) by Research 2014-2015

 

Provisional Result Ph.D/M.Sc (Engg.,) by Research Course Work Examinations April/May-2014

Information on Ph.D. / M.Sc ( Engg ) Programs:

Corrigendum for Notification dated 2 June 2014 for Registration to Research Programmes of VTU

Notification for Registration to Research Programmes of VTU

Application Form

Fees Structure

Regulations  ( will be uploded shortly )

  Format & Course work Syllabus 2014 

Research centre List 2014 -15

University Level Research Aptitude Test Syllabus

ULRAT – Syllabus for Geology Candidates

ULRAT – Syllabus for Nanotechnology Candidates

ULRAT - Syllabus for Library Science

ULRAT - Syllabus for Physical Education 

Model Question Papers: Paper 1 , Paper 2

Paper Cuttings

VTU In Newspapers

VTU on top in trends of Google Search
Paper cutting of VTU tie up with German company
Paper cutting of 17th VTU Inter Collegiate Athletic Meet 2014-15
VTU's Walkathon against bursting crackers and Pollution free Deepavali.
PROF .H. MAHESHAPPA HON'BLE VICE CHANCELLOR, VTU Being felicitated with the Architect of Techinical Education award at Davangere ,
Blood Donation Camp held at "Jnana Sanagama " VTU Belgaum.
MoU with Creative Infotech for Apple in Education.
Engineers day celebrated at VTU on the birth occasion of Sir M Visvesvaraya .
Internship for VTU Students now. ”
Project Plagiarism Software implemented in VTU. ”
MOU with international Institute of Industrial Safety Managment ( IISM ) , Bangalore. ”
Belgaum Chamber of Commerce & Industries ”
VTU Bagged “ 2014 International Quality Award ”
Bangalore Mirror - VTU vows to Declare results in eight days
Paper cuttings of 13th Annual Convocation of VTU .
Election Awarness Programm by VTU.
Progress of VTU Bio Fuel I & D Centre.
VTU Skill development at Dandeli
Enterpreneur Awareness Camp organised by VTU-ED Cell from 24th - 26 th Feburary 2014
HTSE International Conference at VTU
Bharat Ratna Awardee Proff C.N.R. Rao Felicitated .
Paper cutting
Yoga Camp Held at VTU
Shri R. V. Deshpande Hon'ble Higher Education Minister Karnataka Visit to VTU
VTU chess team shines in international championship
Paper cutting 29.01.2014.
VTU Team Enters world championship.
VTU wows with quick results Banglore mirror.
Lead Prayana.
National Conference on Redefining Libraries in Electronic Age (RLEA-2013)
Invitation for proposals from original e-resource publishers
Kanakdasa Jayanti Celebrated at VTU Paper cuttings
Bangalore Mirror: Stop Talking, start writing, VTU tells NRN, Shaw & company
Postponement of Redefining Libraries in electronic age Conference.
VTU will tie up with Canadian varsities
Cracker free diwali
Paper cutting The Right ambience for PG studies
Mission VTU Empower 10000 VTU Engineers  
Paper cutting of 15.10.2013 
VTU Job fair paper cutting 
VTU to organise career job fair
VTU Introduces Soft Copies of Answer Scripts
NBA announces the Opening of its Regional Centre ( South ) 
Paper cutting Compulsory internship for VTU students 
Paper cutting Dedicated centres working towards promoting bio-fuel. 
Paper cutting State Proposes Innovation clubs at VTU Colleges.
Paper cutting  Internship for VTU Engineering Students from next year.
Paper cutting Involve in constructive activities
Paper cutting of Foundation Stone Laying Ceremony for the South End Block of Administrative Building
PRESS NOTE Foundation Stone Laying Ceremony for the South End Block of Administrative Building at “Jnana Sangama”, Belgaum.
PHOTO
VTU Signs MOU with NBA
VTU Wins CCI Excellence Award
Chanakya Award to PROF . H. MAHESHAPPA, HON'BLE VICE CHANCELLOR, VTU, BELGAUM
PRESS BRIEF BY PROF . H. MAHESHAPPA HON'BLE VICE CHANCELLOR, VTU, BELGAUM on MOU Between VTU and IEEE - Computer Society on 22nd May 2013.
ENGLISH
KANNADA
Dr D H Rao Nominated as VTU Dean
VTU-International CANEUS Symposium (VICAS-2013) paper cutting of 21 april 2013
VTU-International CANEUS Symposium (VICAS-2013)  paper cutting of 19 april 2013
12th Convocation paper cuttings 
PRESS BRIEF BY PROF . H. MAHESHAPPA HON'BLE VICE CHANCELLOR, VTU, BELGAUM on the eve of 12 th Annual Convocation.
ENGLISH
KANNADA
12th Convocation Rank List
National Seminar on Bio-fuel Held 
Dr D H Rao nominated to VTU Executive council. 
New Registrars for VTU appointed.
Press Note : Dr. K. E. Prakash, and Dr. H. G. Shekharappa have been appointed as the Registrar and Registrar (Evaluation) of Visvesvaraya Technological University, Belgaum respectively
Press Note   Faculty Development Programme (FDP) on “Innovative Implementable Ideas for Industry Institution Interaction
Paper cuttings.
The International Tennis Federation's world ranking Belgaum open Tournament held @ VTU.
Paper cutting  1
Paper cutting  2
Paper cutting  3
Paper cutting  4
International workshop on Green Nanotechnology at VTU
PRESS BRIEF BY PROF. H. MAHESHAPPA VICE CHANCELLOR, VTU, BELGAUM ON GREEN NANOTECHNOLOGY 
 VTU Staff & Students take out 'Cracker-free Deepavali' Jatha
Press Note:  Hon'ble High Court  of Karnataka, Circuit Bench Dharwad has issued directions on 18/10/2012 not to process the applications invited for the appointment of recruitment of various non teaching posts at VTU, Belgaum without the further leave from the Hon'ble High Court.
Kannada
English
Press Note: Visvesvaraya Technological University (VTU), Belgaum will be organizing ‘Campaign’ in Belgaum and in its Regional Centers, on the eve of Diwali to create awareness on the ill-effects of air and noise pollution due to bursting of crackers.
Press Note : Successful completion of Felicitation Function to the VTU Sports achievers on 25/09/2012 11:00 AM at "Jnana Sangama", VTU, Belgaum
 Press Note : Felicitation Function to the VTU Sports achievers for the year 2011-12
Invitation
Inauguration of Digital Library 
VTU at Glance
International Conference at VTU
PRESS NOTE ON " Valedictory Function of ICOE 2012
Photos
PRESS NOTE ON  "International Conference on OPTICAL ENGINEERING"
Photos
"ON LINE QUESTION PAPER DELIVERY SYSTEM"
Online question paper Scheme - reg
" Trends in Developing and Managing e-Resources in Libraries "
ONLINE QUESTION PAPER DELIVERY SYSTEM
11th Annual VTU Convocation 
Evaluation of papers to go digital in VTU.

Examination Guidelines


The candidates admitted to B. E. / B. Tech. before the academic year 2002-2003 and detained in second semester have to repeat the whole semester with new course. In such cases,
If the students had studied his/her I semester with Chemistry group subjects will have to join II Semester New Scheme with physics group. However, they will have to study ELEMENTS OF MECHANICAL ENGINEERING – MES14 in place of Elements of Civil Engineering – CIV23. Provision should be made to conduct MES14 theory classes and internal assessment test for these students by the respective colleges.
Students studied I semester with Physics group will be readmitted to II Semester Chemistry (New Scheme) along with the regular students without any replacement of subjects.


A candidate if desires, shall reject the results of whole semester irrespective of performance of any individual subject. However, there is no provision for the rejection of results of any individual subject. Such rejection shall be permitted only once during the entire course of study.
A candidate can reject the semester results and can take readmission. In such cases, candidate should attended the classes and obtain new internal assessment marks. For such rejection application shall be sent to the Registrar (Academic) within 30 days from the date of announcement of results.
A candidate can reject the semester results by keeping the term attended. In such cases of rejection, Internal Assessment will not be changed. For such rejection application shall be sent to the Registrar (Evaluation) within 30 days from the date of announcement of results.

A candidate who has not obtained eligibility for third semester after a period of three academic years from the date of first admission shall discontinue the course. However, the candidate is eligible for readmission for first year B.E./B. Tech. in any college of the University.
The candidate shall complete the course within a period of eight academic years from the date of first admission, failing which he/she has to discontinue the course
It implies that, any candidate not getting the eligibility for the
5th semester within 6 academic years or
7th semester within 7 academic years
from the date of first admission will not be able to complete the course and hence will have to discontinue after 6th or 7th academic years, respectively as the case may be.

GMR 01: Grace marks shall be awarded to a Subject / Paper / Practical / Head of passing to a maximum of 2% of University Examination marks if, after gracing the candidate gets minimum prescribed marks in the Theory / Practical and passes in the subject.
GMR 02: A candidate shall be eligible to a maximum of 5 grace marks, provided,
He/she has failed in only one subject (Pr/Th/Head of Passing) of the examination
Passes the whole examination by such gracing
Gets minimum prescribed marks in the paper/ practical and aggregate for passing by such gracing
GMR 03: Grace Marks shall be awarded for declaration of classes also.
For obtaining a higher class a candidate is eligible for getting a maximum of 5 grace marks, which will be added to the total aggregate marks of the candidate and will declare the candidate to have passed the examination in I Class or FWD
GMR 04: Grace marks awarded as per GMR 01 for passing a subject and GMR 02 for passing the whole examination are shown only in the ledger and not in the statement of marks. However, the grace marks awarded for getting a higher class shall be indicated along with the aggregate total of the examination.
GMR 05: A candidate is entitled for grace marks only under any one of the regulations either as per GMR01 or GMR 02 or GMR 03.
GMR 06: A candidate is entitled for grace marks of 05 for the award of class of the degree.

All answer scripts of PG courses will be evaluated by two examiners
If the difference between First Evaluation and the Second Evaluation is more than 15, the third examiner shall evaluate the script.
The average of the marks of nearest two valuations shall be considered as the marks secured by the candidate. However, if one of the three marks falls exactly midway between the other two, then the higher two marks shall be taken for averaging.
The same process of third evaluation will be carried out for scripts of undergraduate courses during revaluation.

OMB 7. Corporate Exposure and Learning (CEL)
OMB 7.1 All the candidates shall undertake a CEL of ten weeks duration at the end of the 2nd semester and before the commencement of the 3rd semester. The CEL shall be organization specific
OMB 7.2 The CEL report shall be submitted by the students as per the guidelines prescribed by the University from time to time.
OMB 7.3 The CEL Guide shall carry out the internal assessment of the assignment for 50 marks
OMB 7.4 A panel of Examiners consisting of an external and an internal examiner shall jointly value the CEL report for 100 marks. Out of 100 marks 50 marks for CEL report and 50 marks for Viva-Voce examination. This examination has to be conducted in batches of 5 students.
OMB 7.5. A candidate shall secure a minimum of 50% of marks in aggregate, in the internal assessment, evaluation of CEL report and viva-voce examination. In the event of his failing to secure the 50% marks he shall have to re-do the CEL.

A candidate who passes all the subjects with 70% and above marks in aggregate in the FIRST attempt shall be declared as First Class with Distinction.
A candidate who passes all the subjects with between 60% and 70% of aggregate in the FIRST attempt shall be declared as First Class.
A candidate who passes all the subjects with less than 60% of aggregate marks in the FIRST attempt shall be declared as Second Class.

Bachelor’s degree in Engineering / Technology shall be awarded to the candidates who have passed all the stipulated examination from 1st to 8th semesters. However, declaration of the class of the degree shall be based on the performance of the candidate from 5th to 8th semester examinations taken together.
Bachelor’s degree in Architecture shall be awarded to the candidates who have passed all the stipulated examination from 1st to 10th semesters. However, declaration of the class of the degree shall be based on the performance of the candidate from 7th to 10th semester examinations taken together.
Master’s Degree in Business Administration shall be awarded to the candidates who have passed all the stipulated examination from 1st to 4th semesters. However, declaration of the class of the degree shall be based on the performance of the candidate from 1st to 4th semester examinations taken together.
Master’s Degree in Computer Applications shall be awarded to the candidates who have passed all the stipulated examination from 1st to 6th semesters. However, declaration of the class of the degree shall be based on the performance of the candidate from 1st to 6th semester examinations taken together.
Master’s Degree in Technology shall be awarded to the candidates who have passed all the stipulated examination from 1st to 4th semesters. However, declaration of the class of the degree shall be based on the performance of the candidate from 1st to 4th semester examinations taken together.

Ten ranks shall be awarded in each branch of Engineering/Technology
A candidate shall be eligible for a rank at the time of award of degree in each branch of Engineering / Technology, provided he/she has
Passed in all the subjects from I to VIII semester in FIRST attempt only.
For award of rank in branch of Engineering / Technology the cumulative aggregate marks secured by the candidate from V to VIII semester shall be considered.
Should not have repeated/rejected any of the lower semesters.
Should have completed the prescribed course of study within 4 academic years.
Ten ranks shall be awarded in Bachelor of Architecture.
A candidate shall be eligible for a rank at the time of award of degree for the course of Bachelor of Architecture, provided he/she has:
Passed in all the subjects from I to X semester in FIRST attempt only.
For award of rank in branch of Engineering / Technology the cumulative aggregate marks secured by the candidate from VII to X semester shall be considered.
Should not have repeated/rejected any of the lower semesters.
Should have completed the prescribed course of study within 5 academic years
Three ranks shall be awarded in Post Graduate Degree in each branch of Engineering/Technology.

A candidate shall be eligible for a rank at the time of award of Post Graduate Degree in each branch of Engineering / Technology, provided he/she has:
Passed in all the subjects from I to IV semester in FIRST attempt only.
For award of rank in branch of Engineering / Technology the cumulative aggregate marks secured by the candidate from I to IV semester shall be considered.
Should not have repeated/rejected any of the lower semesters.
Should have completed the prescribed course of study within 2 academic years
Ten ranks shall be awarded in Master of Computer Applications.
A candidate shall be eligible for a rank at the time of award of degree for the course of Master of Computsser Applications, provided he/she has:
Passed in all the subjects from I to VI semester in FIRST attempt only.
For award of rank in branch of Engineering / Technology the cumulative aggregate marks secured by the candidate from I to VI semester shall be considered.
Should not have repeated/rejected any of the lower semesters.
Should have completed the prescribed course of study within 3 academic years.
Ten ranks shall be awarded in Master of Business Administration.

A candidate shall be eligible for a rank at the time of award of degree for the course of Master of Business Administration, provided he/she has:
Passed in all the subjects from I to IV semester in FIRST attempt only.
For award of rank in branch of Engineering / Technology the cumulative aggregate marks secured by the candidate from I to IV semester shall be considered.
Should not have repeated/rejected any of the lower semesters.
Should have completed the prescribed course of study within 2 academic years.

The Principals are requested to suitably notify the students to check the marks card for name correction, if any, in the First Semester level. Such requests together with a copy of the examination application form/s duly attested by yourself or whosoever authorized by you, along with a Demand Draft for Rs. 200/- per marks card be forwarded to the office of the Registrar (Evaluation) for further processing. If marks cards are sent at a later stage for name correction, DD shall necessarily be sent at a rate of Rs. 200/- per marks card.
Depending on the genuinity of the cases, the University reserves its rights to return the Demand Draft.

There is provision of issue of duplicate marks cards in cases where the marks cards are lost or mutilated.
For applying for Duplicate Marks card, an affidavit on Rs.20 stamp paper giving details, such as, USN, Month & Year of passing, Course, Branch, college and how the original marks cards were lost along with a fee of Rs.150/- plus Rs. 50/- per year thereafter payable in the form of a DD drawn in favour of the Finance Officer, VTU Belgaum.
The candidate has to lodge a complaint to local police station of the area where it was lost and submit the original copy of acknowledgement of complaint along with the above affidavit.
The candidates who are in need of the same shall forward their applications along with the relevant documents through the office of the Principal, to the office of the Registrar (Evaluation).


While proposing the panel of examiners, the following points shall be taken care.
• In case the candidate has carried out full or part of the work of dissertation outside the institution, the name of the external guide should be mentioned compulsorily by giving full details.
• The internal guide may be from other department, if the dissertation work is inter- disciplinary.
• While proposing the external examiners, care should be taken to list the examiners who are working in the same field. The examiner may be drawn from other departments in case of work is of interdisciplinary type.
• If the work is carried out in an industry, the list of proposed examiners should contain at least one examiner from the industry and should be well experienced in the field.
• The external examiner proposed should be at least of Assistant Professor or Selection grade lecturer cadre preferably with Ph. D., if they are from educational institutions.
• To the extent possible, do not suggest the same examiner for more than three dissertations.

Project reports should be typed neatly only on one side of the paper with 1.5 or double line spacing on a A4 size bond paper (210 x 297 mm). The margins should be: Left – 1.25″, Right – 1″, Top and Bottom – 0.75″.
The total number of reports to be prepared are
One copy to the department
One copy to the concerned guide(s)
Two copies to the sponsoring agency
One copy to the candidate.
3. Before taking the final printout, the approval of the concerned guide(s) is mandatory and suggested corrections, if any, must be incorporated.
4. For making copies dry tone Xerox is suggested.
5.Every copy of the report must contain
Inner title page (White)
Outer title page with a plastic cover
Certificate in the format enclosed both from the college and the organization where the project is carried out.
An abstract (synopsis) not exceeding 100 words, indicating salient features of the work. (NB: four copies of the abstract are to be submitted to the Department on the date of submission separately)

6.The organization of the report should be as follows
Inner title page
Abstract or Synopsis
Acknowledgments
Table of Contents
List of table & figures (optional)
Usually numbered in roman
Chapters (to be numbered in Arabic) containing Introduction-, which usually specifies the scope of work and its importance and relation to previous work and the present developments, Main body of the report divided appropriately into chapters, sections and subsections.
The chapters, sections and subsections may be numbered in the decimal form for e.g. Chapter 2, sections as 2.1, 2.2 etc., and subsections as 2.2.3, 2.5.1 etc.
The chapter must be left or right justified (font size 16). Followed by the title of chapter centered (font size 18), section/subsection numbers along with their headings must be left justified with section number and its heading in font size 16 and subsection and its heading in font size 14. The body or the text of the report should have font size 12.
The figures and tables must be numbered chapter wise for e.g.: Fig. 2.1 Block diagram of a serial binary adder, Table 3.1 Primitive flow table, etc.
The last chapter should contain the summary of the work carried, contributions if any, their utility along with the scope for further work.
Reference OR Bibliography: The references should be numbered serially in the order of their occurrence in the text and their numbers should be indicated within square brackets for e.g. [3]. The section on references should list them in serial order in the following format.
For textbooks – A.V. Oppenheim and R.W. Schafer, Digital Signal Processing, Englewood, N.J., Prentice Hall, 3 Edition, 1975.
For papers – Devid, Insulation design to combat pollution problem, Proc of IEEE, PAS, Vol 71, Aug 1981, pp 1901-1907.
Only SI units are to be used in the report. Important equations must be numbered in decimal form for e.g.
V = IZ ………. (3.2)
All equation numbers should be right justified.
The project report should be brief and include descriptions of work carried out by others only to the minimum extent necessary. Verbatim reproduction of material available elsewhere should be strictly avoided. Where short excerpts from published work are desired to be included, they should be within quotation marks appropriately referenced.
Proper attention is to be paid not only to the technical contents but also to the organization of the report and clarity of the expression. Due care should be taken to avoid spelling and typing errors. The student should note that report-write-up forms the important component in the overall evaluation of the project
Hardware projects must include: the component layout, complete circuit with the component list containing the name of the component, numbers used, etc. and the main component data sheets as Appendix. At the time of report submissions, the students must hand over a copy of these details to the project coordinator and see that they are entered in proper registers maintained in the department.
Software projects must include a virus free disc, containing the software developed by them along with the read me file. Read me file should contain the details of the variables used, salient features of the software and procedure of using them: compiling procedure, details of the computer hardware/software requirements to run the same, etc. If the developed software uses any public domain software downloaded from some site, then the address of the site along with the module name etc. must be included on a separate sheet. It must be properly acknowledged in the acknowledgments.
Sponsored Projects must also satisfy the above requirements along with statement of accounts, bills for the same dully attested by the concerned guides to process further, They must also produce NOC from the concerned guide before taking the internal viva examination.
The reports submitted to the department/guide(s) must be hard bounded, with a plastic covering.
Separator sheets, used if any, between chapters, should be of thin pape
NAME OF THE INSTITUTION
Address with pin code
Department of ……………………………………………………..

CERTIFICATE
Certified that the project work entitled ………………………………………………… carried out by Mr./Ms. ………………………….……………….., USN…………………..………, a bonafide student of …………………………………….in partial fulfillment for the award of Bachelor of Engineering / Bachelor of Technology in ………………………………………………………….……… of the Visveswaraiah Technological University, Belgaum during the year ……………………… It is certified that all corrections/suggestions indicated for Internal Assessment have been incorporated in the Report deposited in the departmental library. The project report has been approved as it satisfies the academic requirements in respect of Project work prescribed for the said Degree.

Name & Signature of the Guide Name Signature of the HOD Signature of the Principal
External Viva

Name of the examiners Signature with date
1
2.

Certificate issued at the Organization where the project was carried out
(On a separate sheet, If applicable)
NAME OF THE INDUSTRY / ORGANIZATION
Address with pin code
CERTIFICATE

Certified that the project work entitled …………………………………………………………………………………………… carried out by Mr./Ms . ………………………………………….., USN…………………..………, a bonafied student of ……………………………………………………………………….in partial fulfillment for the award of Bachelor of Engineering / Bachelor of Technology in ……………………………………………………………………….……… of the Visveswaraiah Technological University, Belgaum during the year ……………………… It is certified that, he/she has completed the project satisfactorily

Name & Signature of the Guide Name & Signature of the Head of organization

COLOUR OF THE OUTER COVER/FRONT PAGE OF UG DISSERTATION / PROJECT REPORT

Sl. No.
UG course
Color of the outer cover/front page of the report
1Electronics & Communication, Telecommunication, Bio-Medical, Medical Electronics, Electrical & Electronics and Instrumentation Technology ( EC/TE/BM/ML/EE/IT )PURPLE
2Computer Science and Information Science and Engineering ( CS/IS )CREAM
3Mechanical, Printing Technology, Mining, Industrial Production, Industrial Engineering & Management, Manufacturing Science and Engineering and Automobile ( ME/PT/MI/IP/IM/ MA /AU )SKY BLUE
4Civil, Transportation and Environmental Engineering ( CV/TR/EV )GREY
5Chemical, Cement & Ceramics, Silk, Textile Technology and Polymer Science ( CH/CC/ST/TX/PM )BROWN


DISTRIBUTION OF MARKS FOR B.E./B.TECH. DISSERTATION EVALUATION

Sl. No.
Particulars
Max. Marks
1Relevance of the subject in the present context10
2Literature Survey10
3Problem formulation10
4Experimental observation / theoretical modeling10
5Results – Presentation & Discussion10
6Conclusions and scope for future work10
7Overall presentation of the Thesis/Oral presentation40
Total Marks100



Project reports should be typed neatly only on one side of the paper with 1.5 or double line spacing on a A4 size bond paper (210 x 297 mm). The margins should be: Left – 1.25″, Right – 1″, Top and Bottom – 0.75″.
The total number of reports to be prepared are
One copy to the department
One copy to the concerned guide(s)
Two copies to the sponsoring agency
One copy to the candidate.
3. Before taking the final printout, the approval of the concerned guide(s) is mandatory and suggested corrections, if any, must be incorporated.
6. For making copies dry tone Xerox is suggested.
7. Every copy of the report must contain
Inner title page (White)
Outer title page with a plastic cover
Certificate in the format enclosed both from the college and the organization where the project is carried out.
An abstract (synopsis) not exceeding 100 words, indicating salient features of the work.
Inner title page
Abstract or Synopsis
The organization of the report should be as follows
Acknowledgments
Table of Contents
List of table & figures (optional)
Usually numbered in roman
Chapters (to be numbered in Arabic) containing Introduction-, which usually specifies the scope of work and its importance and relation to previous work and the present developments, Main body of the report divided appropriately into chapters, sections and subsections.
The chapters, sections and subsections may be numbered in the decimal form for e.g. Chapter 2, sections as 2.1, 2.2 etc., and subsections as 2.2.3, 2.5.1 etc.
The chapter must be left or right justified (font size 16). Followed by the title of chapter centered (font size 18), section/subsection numbers along with their headings must be left justified with section number and its heading in font size 16 and subsection and its heading in font size 14. The body or the text of the report should have font size 12.
The figures and tables must be numbered chapter wise for e.g.: Fig. 2.1 Block diagram of a serial binary adder, Table 3.1 Primitive flow table, etc.
The last chapter should contain the summary of the work carried, contributions if any, their utility along with the scope for further work.
Reference : The references should be numbered serially in the order of their occurrence in the text and their numbers should be indicated within square brackets for e.g. [3]. The section on references should list them in serial order in the following format.
For textbooks – A.V. Oppenheim and R.W. Schafer, Digital Signal Processing,Englewood, N.J., Prentice Hall, 3 Edition, 1975.
For papers – Devid, Insulation design to combat pollution problem, Proc of IEEE, PAS, Vol 71, Aug 1981, pp 1901-1907.
Only SI units are to be used in the report. Important equations must be numbered in decimal form for e.g.
V = IZ ………. (3.2)
All equation numbers should be right justified.
The project report should be brief and include descriptions of work carried out by others only to the minimum extent necessary. Verbatim reproduction of material available elsewhere should be strictly avoided. Where short excerpts from published work are desired to be included, they should be within quotation marks appropriately referenced.
Proper attention is to be paid not only to the technical contents but also to the organization of the report and clarity of the expression. Due care should be taken to avoid spelling and typing errors. The student should note that report-write-up forms the important component in the overall evaluation of the project
Hardware projects must include: the component layout, complete circuit with the component list containing the name of the component, numbers used, etc. and the main component data sheets as Appendix. At the time of report submissions, the students must hand over a copy of these details to the project coordinator and see that they are entered in proper registers maintained in the department.
Software projects must include a virus free disc, containing the software developed by them along with the read me file. Read me file should contain the details of the variables used, salient features of the software and procedure of using them: compiling procedure, details of the computer hardware/software requirements to run the same, etc. If the developed software uses any public domain software downloaded from some site, then the address of the site along with the module name etc. must be included on a separate sheet. It must be properly acknowledged in the acknowledgments.
Sponsored Projects must also satisfy the above requirements along with statement of accounts, bills for the same dully attested by the concerned guides to process further, They must also produce NOC from the concerned guide before taking the internal viva examination.
The reports submitted to the department/guide(s) must be hard bounded, with a plastic covering.
Separator sheets, used if any, between chapters, should be of thin paper

(On a separate sheet)
NAME OF THE INSTITUTION
Address with pin code
Department of ……………………………………………………..

CERTIFICATE
Certified that the project work entitled …………………………………………… carried out by Mr./Ms. ………………………….……………….., USN…………………..………, a bonafide student of ……………………………………………………….in partial fulfillment for the award of Master of Technology in ……………………………………………………………….……… of the Visveswaraiah Technological University, Belgaum during the year ……………………… It is certified that all corrections/suggestions indicated for Internal Assessment have been incorporated in the Report deposited in the departmental library. The project report has been approved as it satisfies the academic requirements in respect of Project work prescribed for the said Degree.
Name & Signature of the Guide Name & Signature of the HOD Signature of the Principal
External Viva
Name of the examiners Signature with date
1
2.

Certificate issued at the Organization where the project was carried out
(On a separate sheet, If applicable)
NAME OF THE INDUSTRY / ORGANIZATION
Address with pin code
CERTIFICATE

Certified that the project work entitled …………………………………………………………………………………………… carried out by Mr./Ms . ………………………………………….., USN…………………..………, a bonafied student of ……………………………………………………………………….in partial fulfillment for the award of Master of Technology in ……………………………………………………………………….……… of the Visveswaraiah Technological University, Belgaum during the year ……………………… It is certified that, he/she has completed the project satisfactorily

Name & Signature of the Guide Name & Signature of the Head of organization
When once dissertation copies are ready for submission
Submit 4 copies of the dissertations to the respective Regional Offices with a copy of the letter marked to the office of the Registrar (Evaluation).
Ensure that the Panel of Examiners, in the suggested format, has been already submitted as also the Internal Assessment Marks (out of 50) and
After the Conduct of Viva-Voce, dispatch the marks lists directly to the Registrar (Evaluation)

Autonomy Cell

VTU SATUTES ON AUTONOMUS COLLEGES ( AMENDED ) 2011

Autonomy Section:
Pursuant to the recommendations of the Education Commission (1964-66) and with the intention to grant autonomy to eligible engineering colleges in Karnataka under Visvesvaraya Technological University, Belgaum the “Visvesvaraya Technological University Autonomous College Statute, 2006” was framed under Section 43(a) (amendment 2006) of the Visvesvaraya Technological University Act (1994) of Karnataka. The same was assented to by Hon`ble. Governor of Karnataka on 15/12/2007.

Objective of the Statute:
1. To Grant autonomy provisionally to eligible engineering colleges with the concurrence of the Government of Karnataka and the University Grants Commission, New Delhi whereby.
2. The colleges have academic freedom which includes framing their own schemes of study, curricula and student evaluation. The colleges can revise their curricula as and when it is called for. This enables the colleges to modernize their curricula continuously which helps the students to get good and quick placements.
3. The colleges can included add on courses during vacation.
4. The colleges can conduct special supplementary semesters for weak students.
5. They can have better interactions with local industries.
6. There will be healthy competition among autonomous colleges to excel.
7. The colleges can avail grants from funding agencies for development,
8. Applications are invited for grant of autonomy from Engineering Colleges which satisfy criteria for eligibility for grant of autonomy along with supporting documents and are placed before the `Standing Committee for Grant of Autonomous Status` constituted as per the statute.
9. The recommendations of the Standing Committee are placed before the Executive Council of the University for Consideration and approval.
10. The list of engineering colleges approved for grant of autonomy is sent to the Government for their concurrence.
11. On receipt of the concurrence of the Government for grant of autonomy a notification is issued by the University notifying provisional grant of autonomy to those colleges which have received the concurrence of the Government.
12. The colleges have to apply to the University Grants Commission for concurrence to grant of autonomy to them. Upon receipt of concurrence of the UGC the grant of autonomy is confirmed by the University.

Criteria for eligibility for grant of autonomy:
For an engineering college to be eligible to apply for grant of autonomy separately for under graduate and post graduate programs, following conditions have to be met by the college.
(i) 80% of the total number of programs in respective categories (UG/PG) should be having permanent affiliation.
(ii) Number of programs not eligible for permanent affiliation as a per ceutage of the sum of eligible and non eligible programs must be less then 20% in each category (UG/PG).

Governance and Functioning of autonomous colleges:
Governance of autonomous Colleges is carried out as per statute and `Guidelines for Implementation of Autonomy`. Governing Body of the autonomous college, among others, has a nominee of the University. It lays down policies and procedures for Governance of the college carried out through the principal of the college.

Academic Council:
It is the apex academic body of the college responsible for approval of schemes of study, syllabi, examinations and evaluation methods, declaration of results, recommendation of candidates to the University for award of degrees etc. it has a nominee of the University.

Boards of Study:
The college constitutes different Boards of Study for different branches of engineering. The BOS’s are responsible for framing of schemes of study and detailed curricula, academic rules etc. the BOS’s have a University nominee each.
Other bodies like Finance Committee, Recruitment Committee help in administration of the college.

Guidelines for Implementation of Autonomy:
A `Guidelines Committee for Implementation of Autonomy` is constituted by the University. This committee, in consultation with the principals of the autonomous colleges, has evolved a set of Guidelines for systematic implementation of autonomy. Copies of Guidelines are sent to all autonomous colleges. Guidelines Committee meets from time to time to discuss any problems that arise in implementing autonomy and for issuing guidance for overcoming the same.

Performance Evaluation of autonomous College:
The statute prescribes two external evaluation of performance of autonomous colleges: one at the end of three years of autonomy and another at the end of five years of autonomy. The latter determines continuation or otherwise of the autonomous status of a college.

As of August 2008, fourteen engineering colleges have been granted the autonomous status for UG or UG & PG programs. Three colleges have applied for grant of autonomy to their UG/PG programs. The same are under process.
Normal 0

For any further information, interested institutions may contact

The Registrar,
Visvesvaraya Technological University,
“Jnana Sangama”, Belgaum – 590 018.

Phone: 0831-2405468
Fax: 0831 – 2405467

Contact

Vice Chancellor
Visvesvaraya Technological University
“Jnana Sangama”
Belagavi : 590018
Karnataka, India.

Tele: 0831-2498224

The Registrar
Visvesvaraya Technological University
“Jnana Sangama”
Belagavi : 590018
Karnataka, India.

Tele: 0831-2498100
Fax: 0831-2405467
E-mail : registrar[@]vtu.ac.in | (Remove [ ] while mailing to this ID)
Note: For issues related to admission, academic matters and migration certificate etc.

The Registrar(Evaluation)
Visvesvaraya Technological University
“Jnana Sangama”
Belagavi : 590018
Karnataka, India.

Tele: 0831-2498136
Fax: 0831-2405461
E-mail : re[@]vtu.ac.in | (Remove [ ] while mailing to this ID)
Note: For issues related to examination, results etc.

Contact details of VTU Regional Centres

 

Welcome to VTU

Visvesvaraya Technological University is named after notable Indian engineer, scholar, statesman and the recipient of highest honour ‘Bharata Ratna’ Sir. M. Visvesvaraya. VTU is an institution that is rich in history, academic excellence, and leadership. The University is performing and continues to perform with a VISION, MISSION and MANDATE. Visvesvaraya Technological university is one of India’s leading and largest technological Universities. It has 201 affiliated engineering colleges under its jurisdiction. Every year over 50,000 students graduate from this University who are the next generation technical leaders, thinkers, innovators and scholars MORE..